www.programmablepower.com

Ametek
9250 Brown Deer Road
San Diego, CA 92121

Tel: 858-450-0085
Fax: 858-458-0267
Toll Free: 800-733-5427

Ametek is a leading designer and manufacturer of programmable AC and DC power supplies. Ametek offers a full line of products ranging in power from 30 W to 30 kW in full, half and quarter rack packages. The high power density of programmable products makes them ideal for laboratory, ATE, R&D, product design, production test, and bulk power applications. Our products are built into, and provide power to, sensitive equipment such as semiconductor manufacturing, aerospace, automotive, telecom, laser, oil services and medical equipment.

 
 


www.ar-worldwide.com

AR Worldwide RF/Microwave Instrumentation
160 Schoolhouse Road
Souderton, PA 18964

Tel: 215-723-8181
Fax: 215-723-5688

For more than 30 years, Amplifier Research has been building a reputation for quality, consistency, and dependability. AR has become the number one EMC test equipment provider by thoroughly understanding their customer's needs and responding with innovative solutions that make test procedures easier, more efficient and more reliable.

AR manufactures broadband high-power amplifiers from dc to 40GHz (from 1 to 50,000 watts). These amplifiers are primarily used for radiated and conducted susceptibility testing but are equally suitable for general laboratory use (component testing, plasma studies, mass spectroscopy and heating). Available test accessories include antennas, directional couplers, field monitoring equipment, power meters and precompliance EMC systems. A line of transient generators for IEC, automotive, telecom, medical and component testing is also available. These transient generators offer the capability to meet test routines to spec, modify existing spec-based routines (already programmed in) or design your own.

 
 


www.boonton.com

Boonton Electronics Corp.
25 Eastmans Road
PO Box 465
Parsippany, NJ 07054-0465

Tel: (973) 386-9696
Fax: (973) 386-9191

Boonton Electronics Corporation is a manufacturer of test equipment dedicated to measuring the power of RF and microwave systems used in both military and commercial sectors. The company also manufactures impedance measuring instruments, RF voltmeters and audio analyzers.

The company's products are used to test terrestrial and satellite communications, radar telemetry, electronic warfare (EW), electronic countermeasures (ECM), and an expanding number of wireless communications products.

 
 


www.brandywinecomm.com

Brandywine Communications
1153 Warner Ave
Tustin CA, 92780

Tel: (714) 755-1050
Fax: (714) 755-0175

Email:
info@brandywinecomm.com

Brandywine Communications is the premier supplier of precision GPS and time code based time and frequency standard products. Our product list include Frequency Standards, GPS Clocks, Network Time Servers and NTP Servers using GPS, plug-in timing cards such as PCI cards for bus level applications, GPS Frequency standards, GPS Master Clocks, Time and Frequency Systems, Time Displays and Time Code equipment.

 
 


www.centellax.com

Centellax
3843 Brickway Blvd
Suite 100
Santa Rosa, CA 95403

Tel: (707) 568-5900
Fax: (707) 568-7647

Email:
support@centellax.com

Single and Multi-Lane Bit Error Rate Testers, Stressed clock Synthesizers, and Pattern generators. Centellax designs and manufactures affordable high-performance test instruments, test accessories, and components for electrical and optical path signal integrity testing. Products include modular building blocks for <10G, 10G, 14G, 28G, 40G, and 100G applications.

 
 


www.dbmcorp.com

dBm
32A Spruce Street
Oakland, New Jersey
07436

Tel: (201) 677-0008
Fax: (201) 677-9444

Email:
info@dbmcorp.com

Synthesized Signal Generator, Satellite Link Emulation, Carrier to Noise Generators, White Gaussian Noise Generators, Frequency Converters, RF Interfaces, Frequency Synthesizers, Broadband Solid State Attenuators

 
 


www.dewamerica.com

Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879

Tel: (401) 284-3750
Toll Free: (877) 431-5166
Fax: (401) 284-3755

Data acquisition test equipment, portable, benchtop and rackmount models. Dewetron makes large scale data acquisition instruments, capable of recording hundreds or even thousands of dynamic and static input channels. Full line of sensors and input modules for signal conditioning.

 
 


www.lightwave.com

Digital Lightwave
5775 Rio Vista Drive
Clearwater, Florida 33760

Tel: (727) 442-6677
Fax: (727) 536-3541

Digital Lightwave provides protocol and BERT test instruments and technologies for SONET/SDH, OTN, Ethernet, Fibre Channel, DS1/DS3, fiber plant and DWDM testing. The industry-leading NIC Platform offers modules for SONET/SDH/OTN testing from 51M to 40/43G rates, Ethernet 10/100/1000BaseT, GigE and 10GigE, Fibre Channel 1G/2G/4G/8G/10G, DS1/DS3, Optical Spectrum Analyzer, Jitter/Wander testing and more.

The NIC offers 2-slot and 5-slot portable chassis options plus rackmount. Numerous configurations are available including the NIC 40G, the industry’s smallest and lightest 40/43G test solution, and the NIC Plus with all rates from 1.5M to 43G plus Ethernet 10M to 10G, all Fibre Channel rates and DS1/DS3 all in a single chassis with multiple/simultaneous testing.

NIC modules support Test Options, license-based capabilities that can be enabled at the time of initial purchase or at any point in the future. Thus the NIC can be ordered with just the capabilities required today and new features can be added as needed.

 
 


www.ts.eads-na.com

EADS North America Test and Services, Inc.
4 Goodyear
Irvine, CA 92618

Tel: (800) 722-2528
(949) 859-8999
Fax: (949) 859-7139

EADS North America Test and Services, a division of EADS North America, headquartered in Irvine, CA, is a complete test and measurement systems provider. Benefiting from more than 50 years experience in the test and measurement business, EADS North America Test and Services offers a full range of products and capabilities that include integrated test solutions, custom designs, complete turn-key hardware and software systems, commercial-off-the-shelf (COTS) instrumentation, test software, and engineering solutions that address test instrumentation obsolescence.

 
 


www.eastern-optx.com

Eastern OptX
710 East Main Street
Moorestown, NJ 08057

Tel: (877) 870-6789

Email:
info@eastern-optx.com

Delay Line Products, Radar Altimeter Test Sets, Phase Noise Measurement, System Integration

 
 


www.haefelyemc.com

Haefely
1650 Route 22 North
Brewster, NY

Tel: (845) 230-9240
Fax: (845) 279-2467

Haefely EMC Technology has a full range of conducted immunity test equipment designed to simulate the effects of interference sources on electronic, electrical and telecommunications products.

Most popular and included in both IEC and EN product standards are the "classic" EMC tests for electrostatic discharge (esd), electric fast transient/burst (eft), lightning surge, magnetic fields (mf), and power line quality. Our objective is to provide the best-in-class range of instruments that are flexible enough to be used in many applications including CE Marking, product development, type verification, product safety, component and production testing

 
 


www.holzworth.com

Holzworth Instrumentation
1919 14th Street
Suite 610
Bolder, CO 80302-5310

Tel: (303) 325-3473
Fax: (866) 259-1374

Email:
sales@holzworth.com

A global provider of ultra low phase noise RF Synthesizers, Phase Noise Test Systems and Components.  Holzworth leverages proprietary low noise architectures to provide industry leading phase noise performance and excellent spectral purity inside highly compact, rugged form factor packaging.

Holzworth’s  mission is to provide the industry with highly innovative, high performing and straight forward products that have the best performance-to-price ratios available.

 
 


www.hsiotech.com/beta

HSIO Technologies
13300 67th Avenue N.
Maple Grove, MN 55311

Tel: (763) 447-6274

Email:
sales@hsiotech.com

High speed interconnect technologies to serve the semiconductor and electronics industries with low cost high performance products using the best aspects of the Semiconductor Packaging, Electrical Connector/Socket and Printed Circuit industries enabling a unique approach to interconnect challenges.

 
 


www.huntron.com

Huntron, Inc.
15720 Main Street
Suite 100
Mill Creek, WA 98012

Tel: (800) 426-9265
Tel: (425) 743-3171
Fax: (425) 743-1360

Email: info@huntron.com

Huntron Instruments introduced the first Huntron Tracker in 1976. Utilizing a method referred to as Analog Signature Analysis, the Huntron Tracker applies a current-limited AC sinewave across two points of an electronic component or circuit. The resulting current/voltage waveform is shown on a signature display using vertical deflection for current and horizontal deflection for voltage. This unique Tracker signature represents the overall health of the part being analyzed. By comparing the signatures of known good circuit boards to those of suspect boards, faulty nets and components can be quickly identified.

The Huntron product line can be divided into two groups: Benchtop Trackers that are typically used in a manual mode with no software control and software controlled Trackers whose primary functions are under the control of the Huntron Workstation software. The optional scanners are a useful switching matrix that allows for cable style interfaces to be connected to the Tracker. These cable interfaces could be DIP Clip cables, custom cables that connect to PCB connectors, or interfaces to a bed of nails. The Huntron Access USB Prober literally automates the probing process allowing for fast and accurate interfacing to points on a circuit card.

 
 


www.logic-instrument-us.com

Logic Instrument US
11422 Cronhill Drive
Owings Mills, MD 21117

Tel: (650) 948-1745

Email: sales@logic-instrument-us.com

Logic Instrument was formed to support the needs of the US Military and Prime Contractors with ruggedized portable computing and display solutions. The company is focused on markets that need high levels of ruggedness and environmental protection and include C3 Display and Support Equipment requirements of the military and government marketplaces along with commercial markets like geophysical exploration and mining that require ultra ruggedness and reliability. Logic Instrument is an international company with major facilities in the US, Germany and France, specializing in rugged computers and displays with original roots as a computer-based instrumentation company started in 1987.

 
 


www.maurymw.com

Maury Microwave Corporation
2900 Inland Empire blvd.
Ontario, California 91764

Tel: (909) 987-4715
Fax: (909) 987-1112

Maury Microwave Corporation, the world's RF Device Characterization Solutions leader, manufactures a comprehensive line of microwave components and instruments operating from DC to 110 GHz. Our products include RF Device Characterization Solutions, Precision Calibration Standards, VNA Calibration Kits, Noise Calibration Systems and Components, and RF Adapters and Components. Coaxial devices are available from DC to 50 GHz in most transmission line sizes and connector types. Waveguide devices are available in rectangular waveguide sizes for use up to 110 GHz. Maury products include the latest noise measurement and calibration equipment, automated tuner systems, transistor measurement fixtures, and a broad range of support products.

 
 


www.noisecom.com

NoiseCom
25 Eastmans Road
Parsippany, New Jersey 07054

Tel (201) 261-8797
Fax: (201) 261-8339

RF Noise Components · AWGN Generators · Eb-No, NPR, CATV & Optical Test Sets

 
 


www.panashield.com

Panashield
185 West Norwalk Rd. #R
NORWALK, CONNECTICUT 06850-4312 USA

Tel: (203) 866-5888
Fax: (203) 866-6162

Founded in 1989 to supply high quality, EMC turnkey facilities with on-time and on-budget performance. Servicing commercial and government clients worldwide with complete turnkey facilities and upgrades to existing radio frequency shield rooms & RF/Anechoic test chambers. Experienced staff with 18 to 34 years in the RF/Anechoic industry.

 
 


www.sigmasystems.com

Sigma Systems
3163 Adams Avenue
San Diego, CA 92116

Tel: (619) 283-3193
Toll Free: (800) 394-3193
Fax: (619) 283-6526

Sigma Systems makes Superior Temperature Chambers and Thermal Platforms for Research and Production.Sigma Systems bench top chambers are compact in size, easy to use, durable and reliable. Each test chamber is hand crafted of the highest quality materials available, and built to the most exacting principles of engineering and science. Standard operating range is -100°C to +200°C. Extended range units can be supplied with operating ranges as extreme as -195°C to +500°C. All Sigma chambers are heated by electric resistance heat. Cooling can be via expendable cryogenic liquid, or mechanical refrigeration, or both.

Performance and small exterior size are hallmarks of Sigma Systems temperature testing chambers. We can provide production or testing chambers for exceptionally low gradient, high precision, operations. We can also supply very fast ramping chambers for single zone shock, cycling, and cyro-quenching applications. We will use the smallest reasonable footprint we can so you can make more efficient use of your lab or production space.

 
 


www.solar-emc.com

Solar Electronics
10866 Chandler Blvd.
North Hollywood CA 91601

Tel: (818) 755-1700
Toll Free: (800) 952-5302
Fax: (818) 755-0078

Email:
sales@solar-emc.com

Solar Electronics manufacturers test instruments for use in testing to MIL-STD-461 A/B/C/D/E. Test Instruments include RFI transient generators, power sweep generators, spike generators, transient pulse generators. Probes, antennas, LISN’s, Filters, Capacitors, Transformers, Coupling Networks and Resistive Devicesx

 
 


www.taborelec.com

Tabor Electronics Ltd.
9 Hatasia St.
Tel Hanan, Israel

Tel: (972) 4 8213393
Fax: (972) 4 8213388

The Company's extensive product portfolio includes universal counters/timers, synthesizers, pulse, function and arbitrary waveform generators, waveform creation software and more, in various platforms, interfaces and frequency ranges. Technologically advanced, featuring the highest levels of performance, reliability, and most of all, price-competitive, they are sought-after in a diverse array of applications.

 
 


www.temptronic.com

Temptronic
4 Commercial Street
Sharon, MA 02067 USA

Tel: (781) 688-2300
Fax: (781) 688-2301

Temptronic Corporation, the pioneer and worldwide leader in localized thermal inducing systems, in 1970 introduced the concept of providing accurate, controlled "Temperature On the Spot" at the test site as a convenient alternative to temperature chambers and baths.

Bringing precise temperature to the test site for wafers, components, hybrids, printed circuit boards and other devices enables the user to incorporate temperature into any test equipment for characterizing, qualifying and performing fault isolation on a component, PCB, module or wafer for MilSpec, design or production testing.

With more than 37 years of expertise interfacing to the major ATE equipment and wafer probing systems, Temptronic's thermal inducing systems and accessories are an accurate and convenient solution. Whether thermal testing and cycling components, wafers, printed circuit boards, arrays, modules, MCMs, wafers, hybrids and ICs at precisely controlled temperatures at the tester site or on the wafer probing station. Temperatures range from -90° to +300°C. All systems are CFC-free and most systems are available compliant with the European CE standards.

 
 


www.tmi.yokogawa.com

Yokogawa Corporation of America
2 Dart Road
Newnan, GA 30265

Tel: 770-254-0400
Fax: 770-335-9354

Yokogawa designs and manufacturers a full line of test and measurement equipment including Digital Oscilloscopes, Power Analyzers, Data Acquisition, Source-Measure Units and more. Yokogawa's Digital Oscilloscopes offer bandwidths up to 1.5 GHz, 10 MS/s sample rate, 1Giga Words of memory plus a powerful serial bus trigger and analysis options for CAN, I2C and SPI buses. About Yokogawa Electric Corporation - Yokogawa's global network of 18 manufacturing facilities, 83 affiliate companies, and over 650 sales and engineering offices spans 28 countries. Since its founding in 1915, the US$4 billion company has been engaged in cutting-edge research and innovation, securing more than 7,000 patents and registrations, including the world's first digital sensors for flow and pressure measurement. Industrial automation and control, test and measurement, information systems and industry support are the core businesses of Yokogawa. For more information about Yokogawa, please visit our web site at www.yokogawa.com

Yokogawa Corporation of America is the North American unit of $4 billion Yokogawa Electric Corporation, a global leader in the manufacture and supply of instrumentation, process control, and automation solutions. Headquartered in Newnan, Georgia, Yokogawa Corporation of America serves a diverse customer base with market-leading products including analyzers, flowmeters, transmitters, controllers, recorders, data acquisition products, meters, instruments, distributed control systems, and more. For more information about Yokogawa Corporation of America, visit www.tmi.yokogawa.com, call 770-254-0400, or toll-free at 800-258-2552, or e-mail info@us.yokogawa.com.